Skip to main content
TRACEFORMEmergency Electricians
Shocks, tingles and earthing

Electric Shock From a Switch, Socket or Tap? We Find and Fix It 24/7

If someone is still in contact with electricity, do not touch them: switch off at the consumer unit only if safe and call 999. An electric shock from switch or tap metalwork then needs the earthing tested the same day.

We find where the voltage is coming from, repair the earth or bonding fault and test before power goes back on.

Call-out from£110weekday daytime · agreed before we travel · see prices

  • Earthing and bonding tested
  • Faulty circuits isolated safely
  • Repair priced before work starts
  • Tested before we leave
  • Under 60 minGreater Manchester
  • NICEIC registeredverified & trusted
  • Qualified & insuredfor your peace of mind
  • Local coverageGreater Manchester, Liverpool, London, Cambridge & Peterborough
Request a callback
TRACEFORM electrician testing a light switch with a two-pole voltage indicator in a bright hallway as the homeowner watches
A tingle is a warning, not a nuisanceEven a mild buzz from a tap or switch means metal is live that should not be. Stop touching it and keep others away until it has been tested.

What should you do after an electric shock from a switch or tap?

After an electric shock from a switch or tap, deal with the person first: call 999 if they are hurt, burnt, confused or have chest pain. Then stop using that fitting and keep others away. A weekday call-out is typically £110–£150, agreed before we travel, and we test the earthing, bonding and circuit.

Manchester, Liverpool, Cambridge & Peterborough prices

Typical prices

Your call-out price is agreed on the phone before an engineer travels. Any repair is explained and priced for your approval before work starts.

  • NICEIC registered
  • Price agreed first

Emergency call-outs

First hour on site, including the call-out.

  • Weekday daytimeLowest price£110–£150
  • Weekday evening£150–£220
  • Night£175–£245
  • Weekend daytime£160–£235
Safety Notice

Never touch someone who is still in contact with electricity; switch off at the consumer unit only if it is dry and safe to reach, then call 999. Do not touch the switch, tap or appliance again to check it.

Diagnostic view

Schematic illustration of how this fault is traced during diagnosis.

Signs that something is live that should not be

Where you felt it tells us a lot about the cause.

A shock or buzz from a metal light switch or its screwsDamaged cable or an unearthed metal plate.
A tingle from a tap, sink or bath while the water runsPipes at the wrong voltage: bonding or a live fault.
A shock when touching a plug socket faceplateCracked accessory or a broken circuit earth.
A tingle from appliance casings such as a kettle or washerAppliance fault plus a poor earth.
Shocks in several places, with lights dimming or brighteningPossible supply neutral fault: call straight away.
A shock from a radiator or metal pipeA live fault reaching unbonded pipework.
Describe what you are seeing
Right now

After a shock: what to do right now

People come before the electrics: never touch someone still in contact with electricity, and call 999 for anyone hurt.

After a shock: what to do right now
What happenedDo this nowWhat we check
Someone is still in contact with electricityDo not touch them. Switch off at the consumer unit only if it is dry and safe to reach. Call 999.Once medical help has taken over, we isolate the circuit, find the live fault and test the earthing before power is restored.
After a shock: when to get medical helpCall 999 for burns, chest pain, a racing heartbeat, confusion or unconsciousness. If they seem fine, still call NHS 111: heart and internal injuries are not always obvious.We test the fitting, its circuit and the earthing so you know exactly what was live and why.
A tingle from a tap or sinkStop using it and keep others away. Do not touch two metal fittings at once. Get medical advice if anyone felt it.Main and supplementary bonding, plastic pipe sections, immersion heater and kitchen circuits, and any live fault reaching the pipes.
Shock from a light switchLeave the switch alone. Switch off that lighting circuit at the consumer unit if it is safe to reach.Earth to the metal plate, switch screws, cable damage at the back box and continuity of the lighting circuit's protective conductor.
Shock from an applianceSwitch it off. Unplug it only if the plug and socket are dry and undamaged. Do not use it again.The socket circuit earth, earth fault loop impedance, RCD trip time and whether the appliance itself is faulty.
Shocks in several places or lights dimmingKeep away from taps, radiators and metalwork. Switch off at the consumer unit if safe and call us straight away.The incoming supply and PME earth, main bonding and signs of a supply neutral fault that the network operator must repair.

If anyone is hurt, call 999 first. For any shock or tingle, stop using the fitting and have the earthing tested the same day.

Sources: Electrical safety first aid (Electrical Safety First), Burns and scalds (NHS)

Mains electricity should never reach anything you can touch. A shock or tingle means a conductor is live where it should not be and the protection has not cut the power as designed. We find that path, repair it and prove by testing that it has gone.

Why something safe can give you a shock

Metal parts are connected to the green-and-yellow earth. If a live conductor touches them, fault current flows to earth and the breaker or RCD switches off fast. You get a shock when metal becomes live and that earth path is broken, weak or missing. Common causes are a loose earth at a fitting, a cable pierced by a nail or screw, bonding removed during building work, a faulty appliance or a supply neutral fault.

Electric shock from light switch or socket

An electric shock from light switch plates usually means a metal plate with no earth, a fixing screw through the cable, or damage at the back box. Many older lighting circuits have no earth, which is fine with plastic switches but not metal ones fitted later. An electric shock from plug socket faceplates points to a cracked accessory, a loose terminal or a broken earth on the circuit. One snap after walking on carpet is usually static; a repeatable buzz is mains.

Electric shock from tap, sink or bath

Pipes are not part of the wiring, so an electric shock from tap metalwork means voltage reached the pipes from a live fault, such as a damaged immersion heater cable, while the bonding is missing or broken. Plastic pipe sections can leave copper runs unbonded. Older bathrooms have supplementary bonding clamps on taps and pipes; current rules allow it to be left out only when every circuit is RCD protected and main bonding is correct.

Earth bonding gas meter and water pipe checks

Main bonding links incoming metal gas and water pipes to the main earthing terminal. The gas clamp belongs on the house side of the meter, close to it and before any branch; the water clamp near where the pipe enters. It often goes missing after meter changes, new boilers or kitchen refits. Never refit it yourself.

Tingle from appliance casings

A tingle from appliance casings, such as a washing machine or metal kettle, usually means an internal fault, made dangerous by a poor earth. Switch it off and unplug it only if the plug and socket are dry and undamaged. We test the circuit and the appliance.

Shocks in several places and PME earthing

Many homes have a PME earth supplied through the network's neutral. If that neutral breaks, earthed metalwork can rise in voltage, with tingles in several rooms and lights dimming or brightening. Keep away from metalwork and call straight away; a neighbour having power does not rule out a network fault.

When to get an electrician to check earthing

Get an electrician to check earthing after any shock, and after work that may disturb it: a new kitchen or bathroom, a meter change or new pipework. If nothing tripped, the RCD may be missing or faulty, so we time it with a tester. Landlords in England must have inspections at least every five years and complete required remedial work within 28 days or sooner.

How we find and fix the cause of a shock

From your call to a tested repair.

  1. Your call: people first

    We check nobody needs medical help, ask what was touched and agree the call-out price before we travel. Typical response is under 60 minutes in Greater Manchester, Liverpool, Cambridge and Peterborough, and under 2 hours in London.

  2. Prove where the voltage is

    With a two-pole voltage indicator we check the metalwork you touched. Any live circuit is isolated and locked off before anything is opened.

  3. Test the earthing and bonding

    We inspect the main earthing terminal and bonding, then measure earth fault loop impedance, protective conductor continuity, insulation resistance and RCD trip times.

  4. Repair, priced first

    Typical repairs are a reconnected earth, new bonding, a replaced switch or cable section, or an isolated appliance. The price is given on the spot, and where parts allow, the repair is done on the same visit.

  5. Retest and explain

    Repaired circuits are retested before use. We explain the cause and leave the paperwork the job needs.

What the official guidance says

Why people call us after a shock

A shock has a cause that can be found and measured.

We trace the cause

We follow the shock back to the cable, earth or bond at fault, not just the fitting you touched.

Real test readings

Loop impedance, continuity, insulation resistance and RCD trip times, shown to you.

Day and night

Every night and weekend, with the call-out price agreed first.

Price before work

The repair is priced on the spot and only started once you agree.

Earthing and bonding checked

Main earth, gas and water bonding and bathroom bonding tested.

Live metalwork proved dead

Switches, pipes and casings confirmed safe before use.

Results in writing

Test results and the paperwork the repair needs.

Electric shock and earthing questions

Questions people ask after a shock from a switch, socket, tap or appliance.

Is a small tingle from a tap dangerous?
Yes. Any tingle means metalwork is live, and the same fault can give a far worse shock if you are wet. Stop using it and have it tested the same day.
How can I tell a static shock from a mains shock?
Static is one sharp snap that does not repeat. A mains shock is a buzz that lasts while you touch and happens again on the same fitting. If unsure, treat it as mains.
Why did a metal light switch shock me with the light off?
Switching off breaks only one conductor, so the cable at the switch can still be live. It usually means a damaged cable or an unearthed plate.
Should I see a doctor after a minor electric shock at home?
Get advice from NHS 111 or your GP even if you feel fine. Call 999 for burns, chest pain, an irregular heartbeat or confusion.
How much does it cost to fix an earthing fault after a shock?
A weekday call-out is typically £110–£150 and a night call-out £175–£245, agreed before we travel. Simple repairs are typically £110–£185, priced before work starts.
Who fixes a shock in a rented property?
The landlord must arrange the repair. Tenants should stop using the fitting and report it in writing straight away; we can attend on the landlord's or agent's instruction.

Secure callback request

Request a callout

Share your details and an electrician will call you back. Typical response under 60 minutes.

  1. 1 · The problem
  2. 2 · Your details

Step 1 of 2: the problem

What do you need help with?
How urgent is it?
Photos of the problemoptional · up to 5

A photo of the fuse box or fault helps us bring the right parts. Location data is removed.

  • NICEIC
  • 24/7
  • Clear prices

Your details are only used to respond to your enquiry

Greater Manchester coverage

Check your area

Enter a full UK postcode to confirm we cover your area and can respond quickly.

  • Greater Manchester, Liverpool, London, Cambridge & Peterborough
  • Surrounding areas
24/7 emergency electricians

Had a shock or tingle from a fitting?

Keep everyone safe, stop using the fitting and call us. We test, repair the cause and retest before we leave.