Skip to main content
TRACEFORMEmergency Electricians
Damage reports & make safe

Electrical Damage Report for Insurance Claims After Fire or Surge

If there is smoke or fire, get out, stay out and call 999. After a fire, lightning strike or power surge, we make the electrics safe, test the affected circuits and write an electrical damage report for insurance claims.

You get photos, test results and an itemised repair quote. Your insurer or loss adjuster decides the claim.

Call-out from£110weekday daytime · agreed before we travel · see prices

  • Make safe first, day or night
  • Photos and test results included
  • Itemised quote for the repair
  • Certificates when work is done
  • Under 60 minGreater Manchester
  • NICEIC registeredverified & trusted
  • Qualified & insuredfor your peace of mind
  • Local coverageGreater Manchester, Liverpool, London, Cambridge & Peterborough
Request a callback
TRACEFORM electrician photographing a smoke-stained kitchen socket for a damage report as the homeowner holds a folder
Facts and test results, not guessesThe report records what we saw and measured. Where testing supports a likely cause, we say so. Where it does not, we say that too.

What is an electrical damage report for insurance claims?

An electrical damage report for insurance claims records what an electrician found after a fire, surge or lightning strike: damaged parts, test results, photos and the repair needed. We make the installation safe first. A weekday daytime call-out is typically £110–£150, agreed before we travel. Your insurer decides the claim.

Manchester, Liverpool, Cambridge & Peterborough prices

Typical prices

Your call-out price is agreed on the phone before an engineer travels. Any repair is explained and priced for your approval before work starts.

  • NICEIC registered
  • Price agreed first

Emergency call-outs

First hour on site, including the call-out.

  • Weekday daytimeLowest price£110–£150
  • Night£175–£245
  • Weekend daytime£160–£235
Safety Notice

If there is smoke, flames or a hot smell that is getting stronger, leave and call 999. Do not switch damaged circuits back on, and only touch the consumer unit if it is dry, cool and safe to reach.

How the make-safe and damage report work

From your first call to a tested repair and written report.

  1. You call and we check it is safe to wait

    Tell us what happened and what is off. Any sign of fire means leave and call 999. The call-out price is agreed on the phone before we travel.

  2. We make the installation safe

    Damaged circuits are isolated and locked off. Where the rest tests safe, we restore power to it so lights, heating or the fridge can stay on.

  3. Inspection and testing of affected circuits

    We inspect the board, accessories and visible cables, then test insulation resistance, protective conductor continuity, polarity, earth fault loop impedance and RCD trip times.

  4. Written report and itemised quote

    The report lists what we found, what is damaged, what must be replaced and why, with results and photos. The remedial work is priced line by line for your insurer or loss adjuster.

  5. Repair, retest and certificate

    Once agreed, we repair, test again and issue the right certificate: usually a Minor Electrical Installation Works Certificate, or an Electrical Installation Certificate for a new board or circuit.

Right now

What to do after an electrical fire, surge or other damage

Find the row closest to what happened. If there is smoke or fire, get out, stay out and call 999. Safety comes first; the report comes after.

What to do after an electrical fire, surge or other damage
What happenedDo this nowWhat our report covers
Electrical fire, now outWait for the fire service to say you can go back in. Leave the affected circuits off and tell your insurer.Where the fire started in the wiring or fitting, heat damage along the circuit, insulation test results and what must be replaced.
Smoke or scorch marks at the boardDo not touch the consumer unit if it is hot, smoking or wet. If it is still smoking, leave and call 999.Condition of the board, devices and incoming tails, which circuits are affected, photos and whether the board can be repaired or must be replaced.
Lightning strike nearbyLeave tripped devices off if they will not stay on. Unplug undamaged equipment only if the plug and socket are cool and dry.Insulation resistance and RCD results, damaged accessories and equipment we found, and whether testing is consistent with a surge.
Several appliances failed at once after a surgeStop using them and keep them for the insurer. If the network may be involved, ring 105 to report it.Supply voltage readings, condition of the installation, which items failed on test and what we could and could not confirm.
Water reached electricsStop the water at the stopcock if you can. Keep away from wet fittings and only switch off at a dry consumer unit.Which fittings were wet, insulation resistance once dry, parts that need replacing and photos of staining and corrosion.
Before anything is moved or repairedTell your insurer, and your landlord if you rent. Photograph the damage from a safe distance, and keep damaged appliances, plugs and leads in case the insurer wants to inspect them.Photos and readings taken on the day, so the report matches what you saw and what we measured.

Make it safe, tell your insurer and keep the damaged items. A tested, written record helps far more than a description from memory.

Sources: After we leave: advice after an emergency in your home (London Fire Brigade), Report a fault or damage on 105 (SP Electricity North West)

Fire, smoke, lightning and surges can damage cables and fittings in ways you cannot see. Before anything is switched back on, the installation needs making safe and testing. We do both, then put the findings in writing for your insurer, landlord or loss adjuster.

What an electrical report for insurance claim purposes covers

Insurers want to know what is damaged, what the repair involves and whether the installation is safe meanwhile. Our report answers that in plain English, backed by readings and photos taken on the day.

  • What you told us happened and what we were asked to look at
  • How we made it safe and which circuits are isolated
  • What we found, fitting by fitting, with photos and test results
  • What must be replaced and why, and an itemised quote

Electrical fire damage: what we look for

Heat travels. A socket that caught fire may have damaged the cable behind it or the next socket on the ring, and firefighting water reaches places the fire did not. We follow the circuit from the obvious damage, checking accessories, junctions and the board. Where a cable cannot be seen without opening a wall, the report says so.

Electrical damage from lightning strike or a surge

Lightning does not have to hit the house. A strike near overhead lines can send a surge into the wiring, and routers, televisions, boilers and alarm panels may fail at once or weeks later. We test the circuits, check accessories for heat marks and check failed equipment where it is safe to.

Power surge damage from the supply

Power surge damage can also come from the supply, for example a network fault or lost neutral pushing the voltage too high. Lights flaring and several appliances failing together are typical signs. Report suspected network faults on 105; in the North West that reaches Electricity North West. We record the supply voltage we measured.

The tests behind every finding

  • Insulation resistance, to show whether heat, water or a surge has weakened the cable insulation
  • Continuity of protective conductors, to confirm the earth path is whole
  • Polarity, to confirm line and neutral are the right way round
  • Earth fault loop impedance and RCD trip times, to confirm the protection still disconnects quickly

Why the insurer decides, and what we will not write

We report facts: what we saw, what we measured and what the repair involves. If testing points to a likely cause, the report says so and why. If it does not, we will not guess, because an unsupported opinion can harm a claim. Cover is the insurer's decision under your policy.

What official guidance says after damage

Diagnostic view

Schematic illustration of how this fault is traced during diagnosis.

Signs the electrics have been damaged

Signs an event has damaged the electrics, and what each usually means.

Scorch marks, soot or melted plastic on a socket, switch or the consumer unitHeat reached the fitting; test the cable behind.
Several appliances stopped working at the same time after a bang or a flickerA surge or supply problem; testing tells us more.
The RCD or breakers tripped during a storm and will not stay onInsulation or a device may be damaged.
Lights went very bright or very dim just before equipment failedPossible supply or neutral problem. Report it.
A fishy or hot plastic smell in the days after the eventPlastic may be overheating. Stop using it.
Water came through a ceiling onto lights or down a wall past socketsWet fittings must dry and be tested first.
Describe what you are seeing

Why people use us for damage reports

A damage report is only useful if it is accurate.

Safety before paperwork

Made safe on the first visit, day or night, before any report is written.

Measured, not assumed

Findings rest on test readings and photos taken at the time.

A report you can forward

Plain-English findings and an itemised quote, ready for your insurer.

Prices agreed first

Call-out agreed before we travel; repairs quoted on the spot before work starts.

Fire and smoke damage

Heat-damaged fittings, cables and boards isolated and tested.

Lightning and surges

Affected circuits, failed equipment and supply readings checked.

Evidence in one place

Photos, results and the remedial quote in one written report.

Electrician reports for home insurance, landlord and business claims

Damage can happen in any building.

Homeowners

Made safe to live in, working circuits kept on and written evidence for your insurer.

Landlords and managing agents

A quick make-safe, a clear record for tenant and insurer, and certificates once repaired.

Businesses

Shops, offices, restaurants and warehouses keep trading on the circuits that test safe.

Shared and public buildings

Schools, care homes, churches and blocks of flats get a written record for the building manager.

Safety guides worth reading now

Smells, warning signs and landlord next steps.

Electrical damage and insurance questions

Questions about damage reports, insurers and surges.

Do I need an electrician's report to claim on home insurance?
Insurers often ask for one when the electrics are involved. A written report with photos, test results and an itemised quote gives the insurer or loss adjuster something factual to work from. It does not guarantee a payout; the insurer decides under your policy.
Can you tell me what caused the damage?
Where testing and what we can see support a likely cause, the report says so and explains the evidence. Where they do not, it records that the cause could not be confirmed. We do not speculate.
Should I wait for the loss adjuster before getting the electrics repaired?
Making it safe should not wait. We isolate and photograph the damage before anything is removed. Permanent repairs are usually best agreed with your insurer first, which is what the itemised quote is for.
How much does an electrical damage visit and report cost?
A weekday daytime call-out is typically £110–£150 and a night call-out typically £175–£245, agreed before we travel. Where several circuits need testing and recording, it is typically priced as complex fault work at £155–£255. Repairs are quoted separately first. Time on site depends on how many circuits need testing and recording, and any damage that clearly predates the event is noted separately.
Will the network operator pay for appliances damaged by a power surge?
Ofgem's power cut payment rules do not cover damaged equipment or appliances. If you think the network caused it, report it on 105 and ask the operator how to raise a claim. Most people also tell their home insurer.
I rent my home. Who should arrange the report?
Tell your landlord or letting agent straight away, as the installation is normally their responsibility. Leave the affected circuit off and keep clear meanwhile. We can attend at the landlord's request and send them the report.
Can you report on damage from building work, rodents or a leak from above?
Yes. Impact from building work, rodents chewing cables and leaks from above can also leave an installation unsafe. The approach is the same: make safe, test, record and quote. Landlords get a report to share with tenant and insurer. Businesses should keep the report, photos and invoices together in case the insurer asks for trading records.

Secure callback request

Request a callout

Share your details and an electrician will call you back. Typical response under 60 minutes.

  1. 1 · The problem
  2. 2 · Your details

Step 1 of 2: the problem

What do you need help with?
How urgent is it?
Photos of the problemoptional · up to 5

A photo of the fuse box or fault helps us bring the right parts. Location data is removed.

  • NICEIC
  • 24/7
  • Clear prices

Your details are only used to respond to your enquiry

Official sources

  1. After we leave: advice and guidance after an emergencyLondon Fire BrigadeChecked 6 November 2026. Supplies, security and insurance steps after a fire or flood at home.
  2. Electrical safety at homeGreater Manchester Fire and Rescue ServiceChecked 6 November 2026. Warning signs of damaged electrics and the advice to get out, stay out and call 999.
  3. How to make a home insurance claimWhich?Checked 6 November 2026. Contacting the insurer, evidence, loss adjusters and complaints.
  4. Surge protective devices: consumer guidanceThe IETChecked 6 November 2026. Where transient overvoltages come from and how they affect equipment.
  5. Check if you can get a payment for a power cutOfgemChecked 6 November 2026. What supply payments cover, what they exclude, and the 105 number.
Greater Manchester coverage

Check your area

Enter a full UK postcode to confirm we cover your area and can respond quickly.

  • Greater Manchester, Liverpool, London, Cambridge & Peterborough
  • Surrounding areas
24/7 emergency electricians

Damaged electrics after a fire, storm or surge?

Call us to make it safe. You get a written report with photos, test results and an itemised quote for your insurer.