Had an electrical emergency after water got into one of our light fittings and caused the electrics to trip. Called TRACEFORM and they managed to send an electrician out really quickly. He was friendly, professional and explained everything clearly. Found the issue, sorted it out and made sure everything was safe before leaving. Really happy with how quickly and smoothly everything was handled. Would definitely recommend them!
Posted on GoogleTesting, certificates and new fittings
Emergency Lighting Install and Testing in Manchester
Emergency lighting install and testing for shops, offices, blocks of flats and HMOs, with every result recorded. If a fitting is scorched, smells hot or you see smoke, leave the area and call 999 first.
Typical price from£125emergency lighting annual test and certificate, up to 10 fittings · see prices
Tell us roughly how many fittings you have, the type of building and whether there is a log book. We agree the price and a test date that suits you.

- NICEIC registered
- Qualified & insured
How much does emergency lighting testing cost?
Emergency lighting install and testing is priced per visit and per fitting: the annual three-hour test, certificate and log book entry is typically £125–£185 for up to 10 fittings. A new self-contained bulkhead or exit sign is typically £95–£245 supplied, installed, tested and certified. We confirm the price before work starts.
Manchester, Liverpool, Cambridge & Peterborough prices
Emergency lighting prices
Typical supplied-and-fitted prices. After a survey you get a fixed written quote, and nothing starts until you approve it.
- NICEIC registered
- Fixed written quote
Testing, certification, servicing and installation of emergency lighting (BS 5266) and fire alarm systems (BS 5839-1 and -6) for landlords, HMOs and small businesses.
- Emergency lighting annual test and certificate, up to 10 fittingsFull-duration 3-hour discharge test, logbook entry and BS 5266-1 certificate. Over 10 fittings priced per extra fitting. Access above 3.5 m may cost extra.£125–£185
- Emergency lighting test, each additional fitting over 10Added to the up-to-10 test price for each extra emergency luminaire or exit sign on the same visit.Lowest price£15–£25
- Emergency light fitting supplied and installed, per fittingSelf-contained 3-hour LED bulkhead or exit sign, maintained or non-maintained, on an existing nearby circuit. Includes test and certificate. Long cable runs extra.£95–£245
When the mains lighting fails, emergency lighting is what lets people see the way out: the stairs, the corridor junctions and the final exit door. We install new fittings, carry out the annual full-duration test, repair units that fail and complete the log book, across Greater Manchester, Liverpool, London, Cambridge and Peterborough.
Emergency lighting requirements: who is responsible
Emergency lighting requirements for most non-domestic premises in England come from the Regulatory Reform (Fire Safety) Order 2005. The duty sits with the responsible person: the employer in a workplace, or otherwise whoever controls the premises, such as the owner, landlord or managing agent. Escape routes and exits that need lighting must have emergency lighting that works if the normal supply fails, kept in working order.
The Order also covers the common parts of blocks of flats and HMOs: shared stairs, landings and corridors, though not the flats themselves. Your fire risk assessment decides where emergency lighting is needed, and BS 5266-1 is the code of practice installers and testers work to.
Emergency lighting installation: what goes where
A good emergency lighting installation starts with the escape routes. Government guidance lists the places a system would normally cover:
- Each exit door, and outside each final exit
- Corridor intersections and changes in floor level
- Stairways, so every flight receives enough light
- Fire alarm call points and firefighting equipment
- Exit and directional signs along the route
- Windowless rooms, larger toilets and lifts
Escape route, open area and high-risk task lighting
Escape route lighting lets people follow the route safely. Open area lighting, sometimes called anti-panic lighting, covers larger spaces such as a shop floor or church hall so people can reach a route without stumbling. High-risk task lighting serves places where a worker could be in danger if the lights went out, such as beside machinery, so they can make the task safe before leaving.
Maintained, non-maintained and self-test fittings
A maintained fitting is lit all the time and stays lit on battery when the mains fails, which suits exit signs in restaurants and venues. A non-maintained fitting stays off until the normal lighting fails. Most premises use self-contained fittings with their own battery, usually rated for three hours. Self-test and addressable fittings run their own checks and report faults, but someone still has to read and record the results.
Emergency lighting testing: monthly and annual
The monthly functional test, often called the flick test, uses the key switch to cut the supply to the fittings for a short time. Someone walks the route, checks that every fitting and sign comes on, then restores the supply and checks the charge indicators. Trained staff can do this, and it goes in the log book.
The annual test is the one people usually call us for. Every fitting runs on battery for its full rated duration, commonly three hours, and we check each one is still lit at the end. A battery can pass a flick test and still fade long before three hours. Batteries then need around a day to recharge, so we time the test for when the building is closed or quiet.
Your emergency lighting certificate and log book
After the annual test you receive an emergency lighting certificate recording the fittings tested, the results and any failures. We also complete the emergency lighting log book, or start a new one if yours is missing. It should show the date of every test, who did it, what failed and what was done about it, and it is one of the first documents a fire safety inspector asks to see.
When we add or replace fittings, you receive certificates for the emergency lighting and for the electrical work on the circuit that feeds it.
When a fitting fails the test
Most failures come down to a worn battery, a failed LED module, a fitting that has lost its permanent supply, or water in an outdoor bulkhead. Where we carry the parts, we fix it on the same visit. Where a fitting is old or parts are no longer made, we quote for a replacement there and then, before anything is changed.
Emergency lighting Manchester premises ask us about
We test and install emergency lighting Manchester businesses and landlords rely on in shops, offices, restaurants, warehouses, schools, care homes, churches and the common parts of blocks and HMOs. For small blocks, Home Office guidance says emergency escape lighting may be unnecessary where there are only two floors and reliable daylight through the windows. Fire alarm servicing is often booked on the same visit.
What the law and guidance say
The Fire Safety Order requires emergency routes and exits that need illumination to have emergency lighting of adequate intensity in case the normal lighting fails.
Regulatory Reform (Fire Safety) Order 2005, article 14 · legislation.gov.ukArticle 17 requires the responsible person to keep fire safety equipment, including emergency lighting, under a suitable system of maintenance and in efficient working order.
Regulatory Reform (Fire Safety) Order 2005, article 17 · legislation.gov.ukGovernment fire risk assessment guidance describes a monthly function test and an annual full discharge test, and names BS 5266-1 for further guidance.
Fire safety risk assessment: offices and shops · GOV.UKThe same guidance notes that batteries typically take 24 hours to recharge after a full discharge test, so the test is best timed when the building is quiet.
Fire safety risk assessment: offices and shops · GOV.UKFor small blocks of flats, Home Office guidance advises a monthly short functional test and an annual full three-hour duration test by competent contractors.
A guide to making your small block of flats safe from fire · GOV.UK
Which test, how often?
Two routine tests keep emergency lighting in order, and extra checks follow any change to the system. Your fire risk assessment may set a tighter routine.
| Check | How often | What it proves |
|---|---|---|
| Monthly functional test | Every month, usually by trained staff | Each fitting and sign lights on battery when the supply is cut, and recharges afterwards. |
| Annual full-duration test | Once a year, by a competent person | Each battery holds the fitting lit for its full rated duration, commonly three hours. |
| After a repair or alteration | Whenever fittings, circuits or the layout change | The changed parts work and the escape routes are still covered. |
| New installation commissioning | Once, when the system is handed over | Every fitting is correctly placed, connected, charged and lit for its full duration. |
| Self-test system review | Check the panel or indicators monthly | The automatic tests ran, any faults were reported and someone has acted on them. |
Our reading: Keep the monthly flick test going in-house and book the annual duration test with an electrician. Record both in the log book, together with every repair.
Sources: Fire safety risk assessment: offices and shops (GOV.UK)A guide to making your small block of flats safe from fire (GOV.UK)
How an emergency lighting job runs
Tell us about the building
Give us the type of premises, roughly how many fittings and exit signs there are, whether you have a log book and any very high ceilings.
Agree the price and the test window
We confirm the price on the phone and book the duration test for a time when the building is closed or quiet, because the batteries need about a day to recharge afterwards.
Walk the routes and run the test
The electrician checks the condition and position of each fitting, switches the emergency circuits to battery and notes every unit that dims or goes out before the end of the test.
Repair or quote on the spot
Failed batteries or modules are replaced on the same visit where parts allow. Anything larger, such as new fittings or extra coverage, is quoted before work starts.
Certificate and log book
Supplies are restored, charge indicators are checked, results go into the log book and you receive the emergency lighting certificate, plus the electrical certificate for any circuit work.

Responsible person checklist
- Check your fire risk assessment says where emergency lighting is needed and keep it under review.
- Run and record the monthly functional test, and book the annual duration test with a competent electrician.
- Keep the log book on site and record every test, failure and repair.
- Walk the escape routes after any refit or new partition to check no area has been left without cover.
- Never open fittings, remove covers or handle batteries yourself; report a fault and let an electrician deal with it.
- If a fitting is scorched or smells hot, keep people away from it and call an electrician.
- If there is smoke or flame, get everyone out and call 999.
Why businesses book TRACEFORM for emergency lighting
Every fitting recorded
Results are logged unit by unit, so you can see which fittings passed, which failed and what was done about each one.
Prices agreed first
The test price is agreed on the phone and any repair or new fitting is quoted on the spot before work starts.
Tests timed around you
We book the duration test for when your shop, office or block is quiet, and we can attend 24/7 when a fault leaves a route dark.
Paperwork left on site
You keep the certificate and a completed log book, ready for your fire risk assessor or an inspecting officer.
Guides for landlords and managers
- Landlord electrical safety and EICR guideHow the EICR, smoke alarms and other safety checks fit together for rented homes.
- HMO EICR requirements and licence conditionsElectrical and fire safety rules that apply to houses in multiple occupation.
- Landlord electrical emergency obligationsWhat landlords must do when an electrical fault affects tenants.
Emergency lighting questions
How often does emergency lighting need to be tested?
Government guidance describes a short functional test every month and a full-duration test once a year, with BS 5266-1 as the code of practice behind it. Record every test in the log book.
Can staff do the monthly emergency light test themselves?
Yes. A trained member of staff can run the monthly flick test with the key switch, check each fitting lights, then restore the supply and record the result. The annual full-duration test should be done by a competent person.
What does the annual emergency lighting test involve?
Each fitting runs on its battery for its full rated duration, commonly three hours, and we check every one is still lit at the end. Failed units are repaired or quoted, the log book is completed and you receive a certificate.
How much is an annual test for a larger building?
The annual test and certificate is typically £125–£185 for up to 10 fittings, then £15–£25 for each additional fitting tested on the same visit. Fittings above normal ladder height can need access equipment, which we mention before booking.
What is the difference between maintained and non-maintained emergency lights?
A maintained fitting is lit all the time and stays on when the mains fails. A non-maintained fitting only lights when the normal lighting fails. Maintained exit signs are common in places used after dark, such as restaurants.
Does a block of flats need emergency lighting in the common parts?
Often, yes. The Fire Safety Order covers the shared stairs and corridors of blocks and HMOs, and the fire risk assessment decides what lighting is needed. Blocks of only two floors with reliable daylight may manage without it.
How much does it cost to add a new emergency light?
A self-contained three-hour LED bulkhead or exit sign is typically £95–£245 per fitting, supplied and installed on an existing nearby circuit, tested and certified. Long cable runs or difficult access cost more, and we quote the full job before starting.
Book an emergency lighting test or survey
Tell us the basics. We visit, look at the job and give you a fixed quote there and then.
Planned work enquiry
Tell us about the project
A short brief is enough. Photos help but are optional.
- 1 · The problem
- 2 · Your details
Where we test and install emergency lighting
Check your postcode
Enter a full UK postcode to confirm planned-work coverage.
References
- Regulatory Reform (Fire Safety) Order 2005, article 14legislation.gov.ukChecked 6 November 2026. Emergency routes and exits needing illumination must have emergency lighting of adequate intensity.
- Regulatory Reform (Fire Safety) Order 2005, article 3legislation.gov.ukChecked 6 November 2026. Who counts as the responsible person: the employer, or the person in control of the premises, or the owner.
- Fire safety risk assessment: offices and shopsGOV.UKChecked 6 November 2026. Where escape lighting is needed, maintained and non-maintained units, monthly and annual tests, recharge time and BS 5266-1.
- A guide for persons with duties under fire safety legislationGOV.UKChecked 6 November 2026. The Fire Safety Order in common parts of flats and HMOs, and landlords' and managing agents' duties.
- Workplace (Health, Safety and Welfare) Regulations 1992, regulation 8legislation.gov.ukChecked 6 November 2026. Emergency lighting where workers would be specially exposed to danger if artificial lighting failed.
Rated by customers on Google
Live from our Google Business Profile — shown exactly as published.
Excellent service from start to finish. Professional, reliable, and very knowledgeable. The work was completed to a high standard, with great attention to detail, and everything was explained clearly. Really happy with the result and would definitely recommend their electrical services to anyone looking for a trustworthy and skilled electrician.
Posted on GoogleI had a leak from the flat above, which caused all the electricity in my flat to go off, and I was honestly very frightened. The electrician came quickly, safely dealt with the dangerous issues, and got everything sorted. They were professional, helpful, and very reassuring. The price was very reasonable. I'd definitely recommend them.
Posted on GoogleRead all 10 reviews on GoogleUpdated automatically from Google · reviews shown exactly as published
Book the annual test before the log book falls behind
Tell us the type of building, roughly how many fittings it has and when it is quietest. We agree the price first, test every unit, fix what we can on the day and leave a certificate and completed log book.




